Available Anytime!
Call 24 hours for a free estimate!

(510) 886-4455

Pumps & Pump Stations

Sump Pumps

These pumps have been designed for pumping clear and wastewater from house, garden or yard, and is supplied with built-in level control and check valve. The pump and motor section form a pressure-tight encapsulated unit, fully flood-proof, with motor housing constructed from corrosion resistant material, and the outer jacket and impeller of durable plastics. The unique hand/auto switch makes the pump suitable for manual or automatic operation.

sump-pump

Effluent Pumps (3/4" Solids)

The new Polylok™ pumps are available in 4/10 and 1/2 HP sizes, including both effluent and sewage ejector models. These pumps are designed from the ground up to deliver the dependable service and long life expected from any product bearing the Polylok™ name. They include all the features required for residential and light commercial applications, as well as several features not normally found in pumps of this size.

effluent-pump

Sewage Pumps (2" Solids)

The new Polylok™ pumps are available in 4/10 and 1/2 HP sizes, including both effluent and sewage ejector models. These pumps are designed from the ground up to deliver the dependable service and long life expected from any product bearing the Polylok™ name. They include all the features required for residential and light commercial applications, as well as several features not normally found in pumps of this size.

sewage-pumps

Grinder Pumps (Mascerate Solids)

Residential grinder pump for use in the pumping of domestic sewage using the proven ABS™ cutting system. Applications include residential sewage systems, on-site sewage and effluent systems, and low pressure dosing systems.

grinder pumps

2HP Grinder Pumps 115V & 230V

These centrifugal grinder pumps easily handle residential, light commercial or industrial sanitary waste, reducing it to fine slurry. The pump is designed for use in pressure sewer applications or any piping network. The ressed vortex impeller design of the grinder pump provides trouble free, non-overloading operation over the entire performance curve.

grinder-pump

High Head Multi-Stage Submersible Pumps (0.80" Solids)

These 4" sudmersible pumps in 10, 20, and 30 GPM models dominate with superior "Draw Down" capability. Reduced AMP DRAW and COOLER & QUIETER operation. Used for clean and gray water applications in residential, commercial, and agricultural use.

High-Head-Multi-Stage-Submersible-Pumps

High Head Multi-Stage Submersible Effluent Pumps

These 4" submersible filtered effluent pumps in 10, 20, and 30 GPM models offer dependable performance and value for high pressure filtered effluent applications. Capable of handling "dry run" conditions where other manufacturers fail. These filtered effluent pumps can be used in residential, commercial, and agricultural used.

high-head-multi-stage-effluent-pump

High Head Filtered Effluent Pumps (1/8" Solids)

These high pressure pumps are designed for a variety of applications including pumping filtered effluent from aerobic or processed waste water systems as well as for aeration, cistern and irrigation.

High-Head-Filtered-Effluent-Pump

Grommets

When a friction fit is important, you can count on the Polylok Grommet. Our grommets are available in a variety of sizes and are used to ensure a watertight seal. Polylok Grommets instantly provides a water and vapor seal on either curved or flat surfaces!

grommets

Low Profile Filter, Basin & Cover

Polylok’s new low profile external filter basin is ideal for those situations where space limitations are a factor.

low-profile-filter

Pump, Filter and Sump Basins

Perfect for installing an effluent filter or pump outside the tank. These watertight basins are made out of High Density Polyethylene so they won’t breakdown in the harsh septic environment. They come custom made in any 6” height and we guarantee they will be watertight!

Pump-Filter-and-Sump-Basins

Pre-assembled Pump Basin

Tired of assembling your own pump basins? You don’t have to! Polylok now offers a pre-assembled pump basin that includes everything you need from the effluent pump to the heavy duty cover. This all inclusive unit comes ready to hook-up. It is made of high density polyethylene and is light weight, compact and ready for installation.

Pre-assembled-Pump-Basin
A-1 Tank Service
A-1 Septic Tank Service Inc
San Francisco Septic Tank Repair
Located at

Hayward, CA 94544
Phone: (510) 886-4455
Website: http://www.a1tank.net
We Accept
VisaAMEXMasterCardDiscover
Reach Local