Call us: (510) 886-4455 | Serving East Bay, North Bay, South Bay, West Bay & The Greater San Francisco Bay Area

Sewage Ejector Pumps

Sewage Ejector Pumps: How They Work

A sewage ejector pump is necessary if a bathroom, laundry room, or any other plumbing fixture is found below the level of the main sewer or septic line flowing from the house. The pump helps to move the wastewater from the lower fixtures up to the main sewer or septic line so it can be properly drained.

Here, septic tank repair experts give you a closer look at how sewage ejector pumps work and what you need to get a sewage ejector pump installed:

How Sewage Ejector Pumps Work

A sewage ejector pump is a device used to pump waste material from a lower level to a higher one, or from an area of high pressure to a place of low pressure. The most common ejector pump type is the submersible pump, which pumps from a septic tank or a sewage treatment plant to a municipal sewer system.

Sewage ejector pumps are designed to handle small solids, such as toilet paper and human waste, as well as larger solids, such as rags and diapers. The pumps are also designed to handle liquids, such as water and sewage. Most pumps have a float switch that turns the pump on when the water level in the sewage tank or treatment plant rises to a certain level and turns the pump off when the water level drops.

Sewage ejector pumps are typically made of cast iron, stainless steel, or plastic. The pumps are available in a variety of sizes and power levels. The size of the pump is determined by the amount of water it can handle, and the height of the discharge pipe determines the power level.

Sewage ejector pumps are used in a variety of applications, including:

  • Homes with a septic tank
  • Homes with a sewage treatment plant
  • Municipal sewer systems
  • Industrial wastewater treatment plants

System Requirements for a Sewage Ejector Pump

Some factors must be considered when determining the system requirements for a sewage ejector pump. The first is the type of pump that will be used. There are two basic types of sewage ejector pumps – submersible and dry-pit.

Submersible pumps are designed to be used in a pit that is filled with water. The pump is submerged in the water and is turned on when the water level rises to a certain point. The water is then pumped out through a pipe to the desired location.

Dry-pit pumps are designed to be used in a pit that is not filled with water. The pump is mounted on a platform above the pit and is turned on when the water level rises to a certain point. The water is then pumped out through a pipe to the desired location.

The second factor to consider is the size of the pump. The size of the pump is determined by the flow rate and the head pressure. The flow rate is the amount of water that the pump can move in a given period of time. The head pressure is the amount of pressure that the pump can generate to push the water through the pipe.

The third factor to think about is the power source. The pump must be connected to a power source to operate. An electric outlet is often used. However, some pumps are powered by batteries, and some are powered by a gasoline engine.

The fourth factor to consider is the type of sewage that will be pumped. There are two basic types of sewage – domestic and industrial. Domestic sewage is sewage from homes and businesses, while industrial sewage is sewage from factories and other commercial companies.

The fifth factor to consider is the destination of the sewage. The sewage must be pumped to a location where it can be appropriately treated. The most common destination is a septic tank. However, some sewage is pumped to a sewer main, and some is pumped to a treatment plant.

Conclusion: Sewage Ejector Pumps

Sewage ejector pumps may be necessary for your home if you have a private sewage system. These pumps are designed to lift sewage from your home and deposit it into the municipal sewer system or a septic tank. If you are considering installing a sewage ejector pump, it is essential to consult with a professional who offers septic tank services to ensure that the pump is the right size for your home and that it is installed correctly.

A-1 Septic Tank Service, Inc. offers septic tank services in Albany and nearby areas, including installing sewage ejector pumps. Ask for a quote today!

Scroll to Top